Upper Limb Ex-Fix
- Prepacked sterile wrist, ankle and metaphyseal kit
- Snap-fit connections for multiple bar or pin sizes
- Single point of tightening for enhanced efficiency
- Carbon coated or aluminium rods with lengths up to 500 mm and diameter 8 mm
Forefoot System
- Twin headless compression screws (2.4 mm & 3.0 mm)
- Click-off screws
- Staples
Locking Small Fragment
- Complete and modular plating system (2.7 mm & 3.5 mm multiaxial locking screws)
- Easy implantation: 1 drill & 1 screwdiver for all screws
- Crosslock (diverging screws for optimal fixation)
- Type II anodisation minimizes osseointegration & cold welding for easy plate removal
Medial Distal Tibia Locking Plate
- Radiolucent aiming device
- Cancellous, cortical & cortical locking screws
- Length 13 to 21 holes (2 hole increments)
Vitus-PF
- CCD 125° - 130°
- Optional anti-rotation stabilizing neck screw & reversed fracture screw
- Static or dynamic distal locking
Distal Femoral Locking Plate
- Radiolucent aiming device and drill block
- Length 5, 7, 9 & 13 holes (left/right)
- Cortical and cancellous locking screws
Winsta-R
- Low profile anatomical design for minimal soft tissue irritation
- Locking and multiaxial screws & pegs
- Crosslock in shaft area (diverging screws for optimal fixation)
LBN - Locking Blade Nail
- Blade fixation screw for stable triangle of forces
- Proximal locking screw with integrated washer for compression of lateral cortex (with suture holes for rotator cuff repair)
- Type II anodisation minimizes osseointegration & cold welding for easy nail removal
MIS Screw System
- Minimally invasive chevron osteotomy
- Uniform thread pitch
- Stable anchoring in bone with excellent force transmission
Proximal Tibia Locking Plate system
- Lateral & medial locking plates
- Radiolucent aiming device for percutaneous technique
- Type II anodisation minimizes osseointegration & cold welding --> easy plate removal
Distal Anterolateral Tibia Locking Plate
- Anatomical design conforming to natural torsion of distal tibia
- 4 screw holes for fixation close to articular surface
- Length 7 to 13 holes (2 hole increments)
Winsta-PH - Ange Stable Proximal Humerus Plate System
- High stability with low implant dimensions
- Diverging and converging angle-stable or conventional screws
- Radiolucent aiming device for percutaneous fixation via soft-tissue friendly transdeltoid approach
Pelvic Fixator
-
Assures pelvic stabilization with a minimally invasive procedure
-
Rapid application
-
Can be used as definitive treatment
-
PipTree
- Intramedullary fusion of PIP joint of small toes. Lower infection rates compared to K-wires
- Fixation in physiological position (0°, 10° of 20° of flexion)
- No removal necessary
Locking Large Fragment
- Angular stable support of fragments regardless of bone quality
- Cancellous locking screws 6.5 mm for higher stability in metaphyseal bone
- Broad and narrow straight plates
Pilon Locking Plate System
- Medial, anterior, posterior & pilon plates
- Low profile anatomical design
- Cancellous, cortical & cortical locking screws
Winsta-C - Clavicle Plating System
- S-shaped, J-shaped & lateral clavicle plate
- Non-locking, locking & multiaxial locking screws
- Type II anodisation minimizes osseointegration & cold welding for easy plate removal
CAS - Cannulated Screws
- Self-drilling & self-tapping
- Cannulated for minimally invasive treatment and guided insertion
- Various thread types (colour coded) for wide range of indications
Twin Head Compression Screws
- Thread at screw head has larger diameter and smaller pitch than on the screw tip
- Diameter 2.4, 3.0, 4.5 and 7.0 mm
- Cannulated for minimally invasive treatment and guided insertion
Pedus Foot System
- Low profile multiaxial locking plate system for joint fusion and fracture treatment
- MTP – TMT – TN – CC fusion
- One drill & one screwdriver for all screws
Distal Fibula Locking Plate
- Low profile anatomical design
- Cancellous, cortical & cortical locking screws
- Length 7, 10 & 12 holes
Vitus-FT - Tibia nail
- Advanced nail design for reamed or unreamed insertion over bullet style tip guide wire
- Length 240 to 420 mm (15 mm increments) - Diameter 8 to 12 mm (1 mm increments)
- Static or dynamic locking
Winsta-E - Distal Humerus - Olecranon
- Anatomical plate design with multiaxial locking screws
- Dorsolateral, lateral & medial distal humerus plates
- Type II anodisation minimizes osseointegration & cold welding for easy plate removal
EIN - Elastic Intramedullary Nails
- Percutaneous insertion
- Intra-operative shortening
- Diameter 1.0 to 5.0 mm (0.5 mm increments)
Twin Head Compression Screw
- Thread at screw head has larger diameter and smaller pitch than on the screw tip
- Diameter 2.4, 3.0, 4.5 and 7.0 mm
- Cannulated for minimally invasive treatment and guided insertion
Winsta-E - Elbow Plating System - Olecranon
- Anatomical plate design with multiaxial locking screws
- Optimal reconstruction of joint surface
- Type II anodisation minimizes osseointegration & cold welding for easy plate removal
K-wires
- Prepacked sterile of various diameters & lengths
- Single or double trocar tip
- Smooth or threated
Calcaneal Locking Plate
- Length 60, 70 & 80 mm
- Easy reshaping
- Multiaxial locking screws
Screw Extraction Set
- Multi-purpose
- For removal of all types of screw heads and diameters
- For removal of broken screws
Periprosthetic Cable Plate System
- Proximal hook plates & diaphyseal straight plates
- Small or medium hook for maximum conformity to greater trochanter
- Cable clamp and screw allows for multiple retightnening
Lower Limb
- Prepacked sterile wrist, ankle and metaphyseal kit
- Snap-fit connections for multiple bar or pin sizes
- Single point of tightening for enhanced efficiency
- Carbon coated or aluminium rods with lengths up to 500 mm and diameter 8 mm
Hybrid Fixator System
-
No obstruction to fracture visualization, allowing faster and easier reduction
-
Easier to check callus formation and bone healing
-
Less radiation exposure for the surgical team
-
Less inventory, minimal instrumentation
-
Sterile External Fixator Kits
- Prepacked sterile wrist, ankle and metaphyseal kit
- Snap-fit connections for multiple bar or pin sizes
- Single point of tightening for enhanced efficiency
- Carbon coated or aluminium rods with lengths up to 500 mm and diameter 8 mm
Bio 1
-
High purity B-tricalciumphosphate
-
Complete range adapted to specific indications
-
Ready to use as cancellous or cortico-cancellous bone augments
-
Bio 1-Kit
-
Pre-loaded vacuum sealed syringe
-
Simple way to combine bone marrow and Biosorb for bone grafting
-
Harvesting and mixing are done in complete aseptic conditions which preserves the coagulum until graft placement
-
Bio 1-Quickset
-
Injectable self-hardening bone substitute
-
Bioabsorbable and osteoconductive material
-
Fast mixing and setting time
-
All-in-one pack / ready to use
-
BIO 1-S
-
Pre-filled syringe containing Tricalcium Phosphate
-
Designed for filling small volume cavities that are not subject to mechanical stresses
-
Used as cancellous bone to promote bone healing
-
